To keep your LYNQ e-bike performing like new, regular maintenance is required. Whether you are riding the Loop, Current, or Relay, these steps will protect your investment and ensure your safety on the road. Because your bike contains advanced electr

To keep your LYNQ e-bike performing like new, regular maintenance is required. Whether you are riding the Loop, Current, or Relay, these steps will protect your investment and ensure your safety on the road.<h2 id="cleaning-your-e-bike-safely">Cleaning Your E-Bike Safely</h2>Because your bike contains advanced electronics, including touch displays and a 48V battery system, you must be careful with water:<ul><li>Never use a pressure washer: High-pressure water can bypass seals and damage the motor, battery, or the 2.8&quot; and 4.8&quot; touch displays.</li><li>The &quot;Two-Bucket&quot; Method: Use a bucket of water with mild bike soap and a second bucket of clean water for rinsing with a soft cloth.</li><li>Dry Immediately: After wiping down the frame, use a microfiber towel to dry the bike, especially around electrical contact points and the chain.</li></ul><h2 id="drivetrain-and-mechanical-care">Drivetrain and Mechanical Care</h2>All LYNQ bikes feature high-quality Shimano gearing (7-speed on Loop/Current, 8-speed on Relay) that needs regular attention:<ul><li>Chain Lubrication: Apply a bike-specific lubricant to the chain every 100 miles or after riding in the rain to prevent rust and ensure smooth shifting.</li><li>Brake Inspection: LYNQ bikes use hydraulic brakes which provide superior stopping power but should be checked regularly for pad wear.</li><li>Bolt Check: Periodically check that all major bolts (handlebars, seat post, and racks) are tight, as e-bike vibrations can cause them to loosen over time.</li></ul><h2 id="tire-maintenance">Tire Maintenance</h2>Your tires are the only thing between you and the road, and they significantly impact your range:<ul><li>Check PSI Weekly: Ensure your pneumatic tires are inflated to the recommended pressure listed on the sidewall to maximize your up to 34-mile range.</li><li>Inspect for Debris: Regularly check the treads for glass, thorns, or sharp rocks that could cause a flat.</li><li>Suspension Care: Wipe down the stanchions of your front hydraulic suspension after dusty rides to keep the seals moving smoothly.</li></ul><h2 id="storage-best-practices">Storage Best Practices</h2><ul><li>Avoid Extreme Heat: Do not store your bike in a hot car or in direct sunlight for extended periods, as this can degrade the battery.</li><li>Indoor Storage: Whenever possible, store your bike indoors in a dry, temperature-controlled environment to prevent corrosion.</li></ul><blockquote>Reminder: LYNQ bikes are built with a steel or aluminum platform designed for durability, but regular care is the best way to prevent premature wear.</blockquote>

Cleaning and Long-Term Care for Your LYNQ Bike

Maintaining the correct tire pressure is the single most effective way to optimize your LYNQ bike's performance. Because our bikes utilize a powerful 48V architecture and sophisticated PedalSense™ torque sensors, your tires are the critical link that

Maintaining the correct tire pressure is the single most effective way to optimize your LYNQ bike&apos;s performance. Because our bikes utilize a powerful 48V architecture and sophisticated&#xA0;PedalSense&#x2122; torque sensors, your tires are the critical link that translates motor power into movement.<h2 id="why-tire-pressure-is-critical">Why Tire Pressure is Critical</h2><ul><li>Battery Range &amp; Efficiency: Under-inflated tires increase &quot;rolling resistance,&quot; forcing the motor to work harder and drain the battery faster. Keeping your tires properly inflated ensures you can reach your bike&#x2019;s full&#xA0;34-mile range.</li><li>Protection for Rims &amp; Motors: LYNQ bikes are heavier than traditional bicycles. Adequate pressure provides the necessary cushion to protect your expensive rims and hub motors from damage when hitting potholes or curbs.</li><li>Handling &amp; Safety: Correct pressure ensures the tire maintains its intended shape for stable cornering and effective braking.</li></ul><h2 id="recommended-psi-by-model--terrain">Recommended PSI by Model &amp; Terrain</h2>While you should always check the&#xA0;PSI range printed on your tire&apos;s sidewall as a baseline, use these guidelines for the best experience:<table><thead><tr><th>Model</th><th>Terrain</th><th>Recommended PSI</th><th>Benefit</th></tr></thead><tbody><tr><td>LYNQ Loop (20x4&quot; Fat Tires)</td><td>Pavement</td><td>20 &#x2013; 30 PSI</td><td>Max speed and battery range.</td></tr><tr><td> </td><td>Sand/Snow</td><td>5 &#x2013; 15 PSI</td><td>&quot;Floats&quot; over soft surfaces.</td></tr><tr><td>LYNQ Current (Commuter)</td><td>City Streets</td><td>40 &#x2013; 50 PSI</td><td>Crisp handling and low drag.</td></tr><tr><td>LYNQ Relay (Cargo)</td><td>Heavy Loads</td><td>Add 5 &#x2013; 10 PSI</td><td>Prevents rear-tire &quot;squat.&quot;</td></tr></tbody></table><h2 id> </h2><h2 id="pro-tips-for-performance-tuning">Pro-Tips for Performance Tuning</h2><ul><li>The Weight Factor: For every 20 lbs (9 kg) of extra weight (rider + cargo) over 160 lbs, add&#xA0;2&#x2013;3 PSI to your tires to maintain efficiency.</li><li>The &quot;Cargo Offset&quot;: On the&#xA0;LYNQ Relay, we recommend running the rear tire&#xA0;3&#x2013;5 PSI higher than the front to support the weight of groceries or gear.</li><li>Temperature Watch: Air contracts in the cold. For every 10&#xB0;F drop in temperature, your tires can lose approximately 1 PSI. Check your pressure more frequently during winter months.</li><li>Weekly Routine: Tires naturally lose a small amount of air over time through the rubber and valves. Check your PSI once a week to avoid a &quot;sluggish&quot; feel.</li></ul><blockquote>Quick Diagnostic: If your LYNQ bike feels &quot;sluggish,&quot; takes longer to reach its 20 mph top speed, or your range is lower than usual, your tire pressure is likely too low.</blockquote>

Tire Pressure & Performance: The "Secret" Range Booster

The drivetrain is the "engine room" of your e-bike, consisting of the chain, Shimano gears, and the PedalSense™ torque sensor system. Regular maintenance prevents premature wear and ensures that the motor’s power is delivered efficiently to the road.

The drivetrain is the &quot;engine room&quot; of your e-bike, consisting of the chain, Shimano gears, and the PedalSense&#x2122; torque sensor system. Regular maintenance prevents premature wear and ensures that the motor&#x2019;s power is delivered efficiently to the road.<h2 id="key-components-by-model">Key Components by Model</h2><ul><li>LYNQ Loop &amp; Current: Equipped with a&#xA0;7-speed Shimano drivetrain.</li><li>LYNQ Relay: Features a heavy-duty&#xA0;8-speed Shimano drivetrain and higher gearing for cargo hauling.</li></ul><h2 id="1-chain-cleaning-and-lubrication">1. Chain Cleaning and Lubrication</h2>A clean chain is the best way to prevent the &quot;grinding&quot; noise and friction that robs you of battery range.<ul><li>Clean Regularly: Use a degreaser and a soft brush to remove grit and old oil every 100 miles or after riding in wet conditions.</li><li>Apply Lube Sparingly: Apply a bike-specific lubricant to the inside of the chain links while rotating the pedals backward.</li><li>Wipe Off Excess: Always use a clean rag to wipe off excess oil; extra lubricant attracts dirt and creates an abrasive &quot;grinding paste&quot; that wears down your gears.</li></ul><h2 id="2-shifting-best-practices">2. Shifting Best Practices</h2>Proper shifting habits protect your Shimano components and help the&#xA0;PedalSense&#x2122; system work naturally.<ul><li>Ease Off While Shifting: Briefly reduce your pedaling pressure when clicking the gear shifter to allow the chain to move smoothly between gears.</li><li>Don&apos;t &quot;Cross-Chain&quot;: Avoid riding in the most extreme gear angles for long periods to reduce lateral stress on the chain.</li><li>Shift Early: On the&#xA0;LYNQ Relay, shift into a lower gear&#xA0;before you start a steep climb or begin moving with a heavy cargo load.</li></ul><h2 id="3-professional-inspections">3. Professional Inspections</h2>Because LYNQ bikes are &quot;Powered by Apollo,&quot; they have access to a massive support network for technical maintenance.<ul><li>Chain Stretch: Over time, e-bike chains &quot;stretch&quot; due to high motor torque; have a professional check your chain wear every 500&#x2013;700 miles.</li><li>Derailleur Alignment: If your bike is skipping gears or making clicking noises, the derailleur may need a precision adjustment.</li><li>Service Partners: You can visit any of the 100+ certified service partners in the Apollo network for a professional drivetrain tune-up.</li></ul><blockquote>Pro Tip: Use a &quot;Dry Lube&quot; if you mostly ride in dusty or sandy conditions (common for the&#xA0;LYNQ Loop), and a &quot;Wet Lube&quot; if you frequently commute in rainy weather with the&#xA0;LYNQ Current.</blockquote>

Maintenance & Care

Cleaning and Long-Term Care for Your LYNQ Bike

Tire Pressure & Performance: The "Secret" Range Booster

Drivetrain Maintenance: Keeping Your Ride Smooth